Ok, the top is looking pretty good.
The next step is buttoning up the front and the wire-on. The one problem I have is the seams at the end of the rear bow. They curve a little (or at least how I put the top on they ended up that way) and I am wondering about gathering up that material and stapling it down before the wire on is put over it, is this possible?
At the very least, move the seam over the bow, even if I still end up with a wrinkle there but to hide the seam at the very least.
Also, I am thinking stapling it pretty good across the bow before the wire-on, this would be proper?