I am preparing to wire my Camstar (Transtar/Camaro clipped) soon and having an alternator that I believe to be a Three wire converted to one wire (not sure yet) I am wondering if I can go either way with it. I would like to go back to three wire I think.
It is currently set up with the white an orange wire in the dual plug (Delco Remy) set with the orange wire connected to the BAT. terminal with the heavy red wire from the system and the white wire has two very small diodes soldered to it with the tails twisted together and hooked to nothing. I am guessing this is some form of mod to one wire. Anyone know if I should hook it up one way or the other?
Thanks
Jim
It is currently set up with the white an orange wire in the dual plug (Delco Remy) set with the orange wire connected to the BAT. terminal with the heavy red wire from the system and the white wire has two very small diodes soldered to it with the tails twisted together and hooked to nothing. I am guessing this is some form of mod to one wire. Anyone know if I should hook it up one way or the other?
Thanks
Jim