Opinions of world products heads?
I have never heard anything bad about them but I'm wondering since these seem to be such a good deal.
There were some of the early Roush heads that had a casting flaw in the exhaust port. Significant impact to the exhaust flow.
Probably due to a core shift during casting. It could be cleaned up with a Dremel though.
I would guess they have addressed it by now.
Not sure on the "Roush" heads but if your asking about SBC type heads then the World products Sportsmans are really good and durable too... They may not have the huge intake runners of the newer heads but at 200cc and good chamber design they work good on most anything... ;)
|All times are GMT -6. The time now is 07:25 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.