Wow! That is a lot of information. In reading my guns manual there is no spec on required CFM. I am using Craftsman Professional Oilless on a 60 gal tank. While I hate this compressor, it was free. I come off the tank with 1/2 inch line for 25 feet with a slight slope, into a regulator and water filter. I come off the reg. with 3/8 hose 50Ft. Then use a 1/4in. 10 ft whip on my gun. I will setup my gun according to your post and let you know what happens. Again, I am doing test panels until I get it right.