This is an upright shop compressor. 110v, 2hp, 7.4 CFM, 25 gallon.
The motor is almost dead on this compressor. It will pump to ~50psi then the motor stalls.
I bought it from ORiellys Auto Parts ~3 years ago for ~$300 (1 yr warranty).
The model 5005 is no longer availabe but a similar model 5006 is shown here
ORiellys has no repair parts available other than air filter and dipstick, and of course they have no clue about where to buy a motor for it.
Anybody got any ideas where I can get a replacement motor?
If it were a separated motor/compressor type I could order a suitable motor from somewhere like Grainger, but it's an integrated motor/compressor type, so the new motor options are going to have to be fairly specific to this application.
As always, thanks for any help!