Hey fellas
This is the first question I've got to ask on this page.
I'm going to rebuild a 350 SBC for a streetrod project. I want to run finned valve covers with no holes (breather & pcv). I would like to use an Edelbrock Performer because there is a flat spot for an oil fill tube in the front.
From the things I have read about the pcv I understand that I will ahead of the game to have one.
My Question is this: If I use a breather on the oil fill tube and mount the coil on the fire wall would it be possible /practicle to smooth out the mounting holes were the coil attaches to the intake and tap it for a pcv valve. If so how would a go about making a baffle so the pvc wouldn't suck oil from the lifter valley.
Sorry about the long post, I just want to get it right the first time.
thanks in advance. any help is appriciated
This is the first question I've got to ask on this page.
I'm going to rebuild a 350 SBC for a streetrod project. I want to run finned valve covers with no holes (breather & pcv). I would like to use an Edelbrock Performer because there is a flat spot for an oil fill tube in the front.
From the things I have read about the pcv I understand that I will ahead of the game to have one.
My Question is this: If I use a breather on the oil fill tube and mount the coil on the fire wall would it be possible /practicle to smooth out the mounting holes were the coil attaches to the intake and tap it for a pcv valve. If so how would a go about making a baffle so the pvc wouldn't suck oil from the lifter valley.
Sorry about the long post, I just want to get it right the first time.
thanks in advance. any help is appriciated