Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Pinto Manual Rack swap.... and Hello!
View Single Post
  #9 (permalink)  
Old 04-16-2003, 01:37 PM
JENSSEN JENSSEN is offline
New Member
 
Join Date: Apr 2003
Location: Calgary, Alberta
Posts: 19
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post

[quote]Originally posted by EBlack36:
<strong>I have changed the Manual rack on my street rod to a power unit, some of the minor differences are some early units used 2 mounting holes and others used 3, the outside mounts are the same and the splines to hook up your steering are a larger on the power rack over the manual. The inner and outer tie rod ends are also different. I bought a rebuilt rack at the parts house for under 200.00 a couple of years ago, I use a lot of salvage yard items, but I did not want any leaks and if I remember correctly it came with the inner tie rod ends. </strong><hr></blockquote>

I bought the manual rack, tie rods already, the splne shaft you speak of are you talking about where the steering coloum meets the rack?
Reply With Quote