Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   piston and rod problems (http://www.hotrodders.com/forum/piston-rod-problems-232468.html)

rowdy51 05-02-2013 06:24 PM

piston and rod problems
 
We have an engine that blew a head gasket and filled the some of the cylinders with water. I tore the engine down had the block cleaned and checked and the pistons wasnt floppy on the rods. I soaked the pistons and rods in diesel for a week and worked them them once a day and sprayed them them with wd-40. I never disassembled them but they freed up. So i rebuilt the shortblock but never fired it. Is it safe since the pistons flopped around on the rods

techinspector1 05-02-2013 07:23 PM

Quote:

Originally Posted by rowdy51 (Post 1672275)
We have an engine that blew a head gasket and filled the some of the cylinders with water. I tore the engine down had the block cleaned and checked and the pistons wasnt floppy on the rods. I soaked the pistons and rods in diesel for a week and worked them them once a day and sprayed them them with wd-40. I never disassembled them but they freed up. So i rebuilt the shortblock but never fired it. Is it safe since the pistons flopped around on the rods

Yeah, go for it. I would. :thumbup:


All times are GMT -6. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.