Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Pistons and rods for sbc 350 ?
Thread: Pistons and rods for sbc 350 ?
View Single Post
  #13 (permalink)  
Old 09-27-2012, 06:08 PM
Icejeep Icejeep is offline
Registered User
  
Last photo:
Join Date: Mar 2010
Location: Stuck
Posts: 59
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Well guy's I have decided what i'm going to do..
I'we got my hands over a set of GM rods that have been worked, Arp bolts, beam polished and weight matched, so they should be up for the task. As far as piston's goes i'm decided to buy flat top pistons from speed pro.
I can get a set of ported 461 Double hump heads that are in good condition. would that be acceptable choice for this mild engine, and work well with my other components ?

So what we are talking about here is 350 sbc w. 10.25:1 compression ratio.
Ported #461 double hump heads, Edelbrock Performer or Edelbrock Victor intake manifold, haven't decided yet. Holley HP 850 carburetor
Camshaft is street roller from comp cams #12-769 - http://www.compcams.com/Company/CC/c...?csid=304&sb=2
1.3/4" headers with dual 3" exhaust.

Best regards.
Last edited by Icejeep; 09-27-2012 at 06:26 PM.
Reply With Quote