Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Pistons and rods for sbc 350 ?
View Single Post
  #35 (permalink)  
Old 10-13-2012, 02:06 PM
Icejeep Icejeep is offline
Registered User
 
Last photo:
Join Date: Mar 2010
Location: Stuck
Posts: 69
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Thank you for all your advice sir. I will contact some cam company's / grinders during next week and then i'll let you know how things work out.

I remember that with the small street roller cam, 2400 stall holeshot converter and 4.10 gears it would go through the traps at 5700-5800 rpm at 117-118 mp/h. It was slow of the line but still i found that it would finish the first gear at 6500 rpm shifts very quickly. 60 ft times were only at flat 2.0 seconds. Hopefully i will do better with my new high stall converter.

Thanks again !

Last edited by Icejeep; 10-13-2012 at 02:14 PM.
Reply With Quote