hi guys
building my first 383 stroker having trouble picking the pistons and cam to go with everything. Building it to run a weiand 6-71. trying to keep compression below 9:1 before the blower. *trying* to avoid race gas territory although I would be ok with a high octane race fuel car.
Here's what I have so far:
350 block .030 over
Scat 435056 forged 4340 crank
AFR 1038 75cc heads
MS909HK main bearings
CB663HNK rod bearings
I would like a real lumpy cam, the heads can go up to 0.600 in. lift
oh and here's where the engine is going
building my first 383 stroker having trouble picking the pistons and cam to go with everything. Building it to run a weiand 6-71. trying to keep compression below 9:1 before the blower. *trying* to avoid race gas territory although I would be ok with a high octane race fuel car.
Here's what I have so far:
350 block .030 over
Scat 435056 forged 4340 crank
AFR 1038 75cc heads
MS909HK main bearings
CB663HNK rod bearings
I would like a real lumpy cam, the heads can go up to 0.600 in. lift
oh and here's where the engine is going