Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Power steering pump on blown motor
View Single Post
  #2 (permalink)  
Old 05-11-2008, 06:40 PM
darkostoj darkostoj is offline
Registered User
Last photo:
Join Date: Feb 2007
Location: Rochester, MI
Posts: 161
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by Marcus
Got a real problem thats got me stumped...I can't seem to align my power steering pump pulley with the 2 groove crank pulley. I'm using a B&M 250 on a sbc that requires me to use a 2 groove pulley...the alternator lines up perfectly with the inside crank pulley groove but my power steering pump pulley is about an inch off. I ordered a inset one groove pulley from March that would bring the pulley in as close to the power steering pump body to line up with the outside crank groove but it's still not even close. Not sure what to do...I definitely want power steering...are there any other GM pumps that have shorter snouts. I was thinking Corvette!

WOW! I came here to post the EXACT SAME THING! haha

anyway here is how everything looks right now and you can see the power steering pump pulley doesnt line up with the outer groove on the supplied v-groove pulley that came with my weiand 671 kit. No problems lining up the alt. belt with the inside groove though.

in case it matters this is on a 67 camaro
Reply With Quote