Hot Rod Forum banner

Power steering pump pulley

1K views 1 reply 2 participants last post by  DoubleVision 
#1 ·
On a sbc, how do you change pulleys on the powersteering pump? Must be a trick to getting them on and off.
 
#2 ·
go to auto zone and rent the puller, it requires a puller that wraps around the lip of the pulley, a 2 jaw puller will only round the lip off. when you go to reinstall the pulley, heat it with a torch and lightly lube the pumps shaft, as it cools down it retains it`s press fit and your ready to go.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top