Have a 350 crate motor I pulled out of my truck.I know nothing about motors and need to hook up the wiring and hoses to run it on a stand/cradle. Don't know where to start. Any help is appreciated.
Bolt it down good...........
Then all you really need just to start it, is 12 volts to the coil and to the starter (big cable)....You could then just jump the solenoid to start it.
|All times are GMT -6. The time now is 02:41 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.