Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Pulling the body
View Single Post
  #8 (permalink)  
Old 01-15-2007, 10:58 AM
Rufus_2's Avatar
Rufus_2 Rufus_2 is offline
Registered User

Last journal entry: Long time no post
Last photo:
Join Date: Sep 2004
Location: georgia
Age: 41
Posts: 62
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
With mine I hung the fenders and hood from the rafters, I built a 4' x 3' dolly with 4" casters to hold my engine and transmission and I rolled those into a corner. I have also built a dolly for the body so I can roll it around if needed. I have found that having things on wheels is essential. My shop is 31' x 11' and once I take the body off I will have about 48 sq ft of open space around my work bench and 24 sq ft. on each side of the frame. Having rolling dollies allows me to play tetris when I need space in a certain area in my shop.
Reply With Quote