Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Question About A 350 Roller Setup
View Single Post
  #21 (permalink)  
Old 12-02-2012, 10:59 AM
ChevroletSS ChevroletSS is offline
Registered User
 
Last photo:
Join Date: Nov 2012
Age: 28
Posts: 178
Wiki Edits: 0

Thanks: 7
Thanked 0 Times in 0 Posts
Every retro part Ive seen is very expensive. Im trying to plan ahead on this build as I havent got my block back yet and go ahead with standard roller parts. Do you all think this is a good parts list to start with. My goal for HP and TQ is about 375 to 425.

http://www.jegs.com/i/Chevrolet-Perf...oductId=761656

http://www.summitracing.com/parts/nal-12371042

http://www.summitracing.com/parts/scc-scp1000bl

http://www.summitracing.com/parts/clo-9-3157x1

http://www.jegs.com/i/Edelbrock/350/7516/10002/-1

http://www.jegs.com/i/Holley/510/0-3310SA/10002/-1

http://www.jegs.com/i/Proform/778/66945RC/10002/-1

http://www.ebay.com/itm/VORTEC-VALVE...p2047675.l2557

http://www.jegs.com/i/Hedman/500/68166/10002/-1

http://www.jegs.com/i/Dynomax/289/89004/10002/-1

Last edited by ChevroletSS; 12-02-2012 at 11:22 AM.
Reply With Quote