|
|
|
04-22-2011, 01:55 PM
|
||||
|
||||
|
Which Ratio ?
The 4.88 Or The 4.56 Is The Gear Im Wanting Too Install In My 68 Chevy C-10 Which Would Be The Best For Street And Strip?
|
|
04-22-2011, 03:37 PM
|
||||||
|
||||||
|
Alot of what will determine the rear gears is what is going to be turning the tires JMO. What engine and transmission and stall converter if it's automatic and what size rear tires are you going to be running also. And IMHO neither one of those gears are good for the street but depending on your set-up i like 3.42 or 3.73 good street and strip gears IMO. i am running 3.73s with 26 inch tall tires and a turbo 350 and a 3000 stall, but another thing to consider is just how much street driving you will be doing also.JMO
Cole
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Muncie's Close Ratio vs Wide Ratio | Fastest65 | Transmission - Rearend | 5 | 10-27-2008 11:43 PM |
| Rod ratio | RobbieRat | Engine | 16 | 11-29-2005 06:52 PM |
| what was the ratio??? | 69elcaminoss | Transmission - Rearend | 2 | 04-08-2004 05:35 PM |
| What ratio?? | Rodder318 | Transmission - Rearend | 4 | 03-06-2003 03:48 PM |
| 3.08 ratio | 70 nova | Transmission - Rearend | 6 | 02-21-2003 06:05 PM |
