Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - rebuilt 327 issues
View Single Post
  #1 (permalink)  
Old 07-03-2010, 08:47 PM
4lug39's Avatar
4lug39 4lug39 is offline
Member
 
Last photo:
Join Date: Jun 2004
Location: Bastrop, Texas
Age: 45
Posts: 41
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
rebuilt 327 issues

I just had my 327 rebuilt and I can't seem to get it running right! 1964 small journal motor, 40 over, 280h comp cam, 461 heads with 1.5 intake/2.02 exh, 4bbl with eldbrock carb, petronics ign with a new coil. I have only have about 4 hours on the motor. It will not idle below 1500 rpms. The advance is @ 40 deg with 15lbs of vacuum and the timing is all over the place. I can't find any leaks on the intake or carb. The valves are all good and set What am I missing. The engine has been jacking with this all day and I am so ready to shoot this engine. Any help or direction to start in would be great.

James
Reply With Quote