Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Removing a 2.8/700r4, Install V-8 with 700r4
View Single Post
  #1 (permalink)  
Old 09-15-2007, 09:22 PM
1230firebird 1230firebird is offline
Join Date: Sep 2007
Location: tn
Posts: 2
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Removing a 2.8/700r4, Install V-8 with 700r4

Transmission question?I have been reading posts about switching fro m tpi/tbi to a carb.Thay say that the converter will not lock up.I am removing a 2.8/700r4 and replacing it with a 305 out of an 84 bonneville.I have a carb,not electric carb,and vacume advance distributor.I also have a 700r4 out of an 86 firebird.I was not going to remove my ecm,so is my tranny going to "lock up" like it is supposed to.All this is going in my 87 firebird.Any comments would be welcome.Thanks,John
Reply With Quote