Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Replacement bench seat for 32 3wdw
View Single Post
  #2 (permalink)  
Old 04-20-2011, 08:57 AM
DanTwoLakes's Avatar
DanTwoLakes DanTwoLakes is online now
Hotrodders.com Moderator
 
Last wiki edit: Contact adhesive
Last journal entry: 49 Packard
Last photo:
Join Date: Apr 2006
Location: Lake Tomahawk, Wisconsin
Age: 64
Posts: 5,823
Wiki Edits: 22

Thanks: 0
Thanked 143 Times in 131 Posts
List your seats in the classified section when you are ready to sell them, you can't advertise in the tech forums.

Bench seats out of Chrysler minivans are used by a lot of the guys with '32s. Check out this thread: CLICK HERE As with any seat that's going in a vehicle it didn't come out of, you need to get it the right height off the floor, so you'll have to come up with your own mounting brackets based on your individual car. Your brackets will then be bolted to the stock seat adjusters already on the seat.
__________________
__________________________________

No one lives forever, the trick is creating something that will.
__________________________________
Reply With Quote