Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Reverse Port
Thread: Reverse Port
View Single Post
  #3 (permalink)  
Old 04-26-2004, 04:11 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Member
 
Last photo:
Join Date: May 2002
Location: Copenhagen, Denmark
Age: 39
Posts: 1,000
Wiki Edits: 0

Thanks: 0
Thanked 1 Time in 1 Post
i believe ive only ever seen one in a picture, it was a smokey yunic engine, a standard BBC bottom end, (with smokey nothing was propably standard though) and it had eight intake stacks, four on each sidewhere the exhaust usually goesm and the headders looked like somone had disembowled a robot ontop of the engine. the side bar in the magazine explained that reversing the port confoguration on the engine allowed for better exhaust tuning (180 degree headder) and higher intake port (it looked like it was somwhere slightly under horizontal so atheast as good as a vertical stack arangement on comparable Can Am engines, forgit to mention that was the purpose of it, Can Am racing,
Reply With Quote