Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Rod Bearing Wear
View Single Post
  #8 (permalink)  
Old 03-19-2010, 10:29 PM
Tubbed357's Avatar
Tubbed357 Tubbed357 is offline
81 Monte Carlo SBC 357
 
Last photo:
Join Date: Aug 2009
Location: Rochester NY
Posts: 46
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Well this time im going for a high compression pump gas friendly 357. somewhere around 11:1 hoping to have one nasty street car. I have a decent set of small chamber heads with big valves. Im going to be going with the XE284 cam. At first i was gong to get a thumpr but i realized they really are not a power based cam, more for just sound ha. Should be one nice motor when im done this time the block is going to the machine shop next week along with the heads. Still need to get the stall but its coming. Any tips you could give me as far as building a nasty street motor. Thanks again
Reply With Quote