Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - roller cam
Thread: roller cam
View Single Post
  #1 (permalink)  
Old 08-31-2002, 09:23 PM
smallblocked_S-10 smallblocked_S-10 is offline
New Member
Join Date: May 2002
Location: MO
Posts: 16
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post roller cam

I have a 350 in my s-10 with Vortec heads and a comp cams magnum 270. It runs okay but i am wanting more. i have decided to get my heads machined on to accept bigger valve springs. I am looking at installing a roller cam and lifters. My question is has anyone have this setup with vortec heads and a roller cam. if so what set up do you run and how well does it run. I am wanting the best i can get since the roller parts aint cheap. thanks for all the help
Reply With Quote