Hot Rod Forum banner

roller lifter install ? SBC

4K views 2 replies 2 participants last post by  chucksrt 
#1 ·
I have a 96 Chevy Express 1500 with a Vortec 350. I had an issue with oiling and found I had a bad set of lifters. I am just looking to confirm how to install the lifters in the bores. The oil feed hole on the side of the lifter- does it need to face the oiling source (there is a oil feed between the lifters) or can the lifters be installed either way in the dog bone? I just want to make sure they are correctly.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top