The Roofus Special
View Single Post
01-31-2011, 07:10 AM
Join Date: Jul 2003
Thanked 2 Times in 2 Posts
Flipper_1938's Photo Album
I finally did something! I mounted my front spring.
After a whole lot of looking, I decided the spring belonged close to the front of the crossmember.
The fun started when I tried to figure out how to align the u-bolts. There isn't a straight line on my crossmember to use as a reference point.
Next issue was where the threads were on my bolts. I built a platform under the crossmember to have a nice flat surface to bolt to. The lovely seam down the middle is where I had to advust the hole location on the platform.
Now to remember exactly where I wanted to mount the crossmember.
...or here (pushed slightly forward)
View Public Profile
Find all posts by Flipper_1938