I wasn't talking about that one Randy, I was talking about the brace he had going from the firewall support over to the frame rail.
But honestly, that isn't a true "triangulated" support either. The brace going down at an angle is doing 99% of the support. It isn't like support going across a corner like this.
If you look at the lower corner of the triangle you added, there is nothing there, the bend in that piece would do next to nothing what so ever in holding the motor up by it's self, it is more aesthetic than anything. But that is nit picking and I don't mean to argue with you over this. But just to throw it all out and discuss.