Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Safe heater position for painting?
View Single Post
  #18 (permalink)  
Old 11-22-2007, 05:03 AM
DanTwoLakes's Avatar
DanTwoLakes DanTwoLakes is offline Moderator
Last wiki edit: Contact adhesive
Last journal entry: 49 Packard
Last photo:
Join Date: Apr 2006
Location: Lake Tomahawk, Wisconsin
Age: 65
Posts: 6,325
Wiki Edits: 22

Thanks: 0
Thanked 281 Times in 244 Posts
Originally Posted by cboy
Do you see any problem with Dan's idea of running one or two baseboard type electric heaters during the actual mixing and shooting?
There should be nothing in those electric baseboard heaters to ignite the fumes. The heating element is encased in a ceramic tube and surrounded by aluminum fins. You should be able to have them going while you're mixing and painting. Check with an electrician, Dewey.

No one lives forever, the trick is creating something that will.

Last edited by DanTwoLakes; 11-22-2007 at 05:42 AM.
Reply With Quote