Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Sanded through my clear coat please help
View Single Post
  #10 (permalink)  
Old 01-04-2011, 03:55 AM
redbird555 redbird555 is offline
Registered User
 
Last photo:
Join Date: Jan 2011
Location: pompano bch
Posts: 11
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
I cant seem to catch a break with this stripe lol. I rebased it yesterday which came out good and the first 2 coats of clear I layed on also came out good. I was giving each about a 15 minute flash time between coats and made sure i only lifted a finger print instead of the clear strings when I tested for the next coat. On the last coat it layed on beautiful looked like a mirror then about 20 minutes later i started noticing bubbling forming in various parts of the hood not like fish eye or een really solvent pop because these were raised above th rest of the paint and when I sanded them this morning I got this....
I tried wetsanding with 800 and got rid of some of them but cant get rid of these and Im afraid of going through the clear again please advise! Thanks Dan
Reply With Quote