SBC 350 Carb Recommendations
Hey guys, I'm new to the site (although I've been creeping in the background doing a lot of searching).
I'm looking for Carb recommendations for my SBC 350 that I'm building. From my searches, I'm torn between a 650 and 750 cfm.
Here's my current engine setup that I'm building:
1974 SBC 350 - Stock Bore
Flat Top Pistons
64cc Edelbrock Performer RPM Aluminum Heads
Edelbrock Performer Intake
Comp Cams Thumpr Cam
MSD Pro Billet Distributor, 6AL box and coil
I realize the Thumpr cam isn't a high HP cam, however it has what I'm looking for. I have done some research and see that the vacuum pressure is the biggest issue that I may have, so I want to make sure I purchase a Carb that will work the best.
Any recommendations are appreciated!
Last edited by airbagd; 01-20-2013 at 07:23 PM.