Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SBC Engine build advice
View Single Post
  #1 (permalink)  
Old 01-06-2013, 01:57 PM
newboldspeed newboldspeed is offline
Registered User
 
Join Date: Jan 2013
Location: Derbyshire uk
Posts: 6
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
SBC Engine build advice

HI, JUST STARTING A ENGINE BUILD AND WILL NEED GUIDANCE AND GOOD ADVICE PLEASE.
1ST TOTAL REBUILD. BEEN READING THREADS AND COLLECTING PARTS FOR A WHILE NOW.
STREET USE MOTOR WITH RWYB IN MIND.MODEL A COUPE.
SO ITS A SBC 327 SHORT MOTOR +30
THIS WILL BE RUN ON PUMP GAS 97 OCTANE AND WITH A 6-71 BLOWER.
5% UNDERDRIVEN
STOCK CRANK 2.1 JOURNAL WITH A NEW 0.10 GRIND AND A 2ND KEY WAY MILLED IN FOR DOUBLE GROVED BALANCER.
RODS IBEAM 5.7 ARP BOLTS.
HEADS CAST DOUBLE HUMP 64cc, 2.02 INTAKE, 1.6 EXHAUST & VALVES S/S.
1.5 ROLLER ROCKERS & GUIDE PLATES

LOOKING FOR ANY ADVISE ON PARTS:
HYPR PISTONS DISHED OR FORGED?

(LIST OF PARTS I HAVE SPARE)
CAM? (NEW COMP CAM 268XE)
LIFTERS? (NEW STOCK HYDR)
VALVE SPRINGS? (HAVE DOUBLE SPRINGS 358lbs)
PUSH RODS?

HOPE YOU CAN HELP WITH MY GOAL.
CHEERS
Reply With Quote