Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SBC HEAD QUESTION: Need Help Picking A Head
View Single Post
  #1 (permalink)  
Old 11-28-2007, 08:29 PM
Mustangsaly's Avatar
Mustangsaly Mustangsaly is offline
Last photo:
Join Date: Jan 2005
Location: Nebraska
Posts: 1,071
Wiki Edits: 0

Thanks: 0
Thanked 1 Time in 1 Post
SBC HEAD QUESTION: Need Help Picking A Head

ok if everything works out, I might part with my vortec heads and a complete 350. so I might be after a different set of SBC heads. new or used. I'm not after a set of AFRs, but would like a set of $400 or $500 to $750 Heads, and would like to achieve in the 425 + HP range with .550 + inch lift.


I looked at Dart Heads, I'm not sure what Dart Head would be best to achieve 10.1CR & 425HP or what other head would be good. I looked on summit for heads, looked at dart and others, who sells new vortec heads bolt on ready for .550 lift ?

I'm planning in the 10.1CR range. what Head would you recommend ?

if I still can't afford a decent head then I won't sell my 062s and they can see the machinist. witch was my plan till about 5pm today. when a guy from down the street ask about the 350 in my 74 Camaro, and my vortec heads for his elcamio.

Reply With Quote