Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SBC Header kit
Thread: SBC Header kit
View Single Post
  #2 (permalink)  
Old 02-10-2012, 09:21 PM
Choptop26 Choptop26 is offline
Registered User
 
Last photo:
Join Date: Apr 2011
Location: Southwest Mo.
Posts: 52
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
I just built a set of long tube headers for my coupe with a kit from Speedway. Nice quality materials . The flanges are good and thick . The pre bent tubes were all bent accurately but there were some die marks on them . At least mine had some marks . They might not all have them . Mine is the only set I've seen . I also had to build my own because nothing off the shelf would fit and I ran them down the outside of the frame rails . I just got them back from getting them ceramic coated and I'm very happy with them . I will try to get a pic and post it . I would not hesitate to build another set with the kit from Speedway . I hope this helps you some .
Reply With Quote