Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - sbc question
Thread: sbc question
View Single Post
  #1 (permalink)  
Old 02-21-2003, 09:31 PM
85 regal 85 regal is offline
Member
 
Join Date: Nov 2002
Location: ill
Posts: 171
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post sbc question

i just freshened up a 350 and installed. at first i had trouble starting it (180 out). i broke the cam in then adjusted the rocker arms. when i finished and went for a drive there was still one ticking so i went back over a few times to see if i was missing something and could not find the one to be ticking but couldnt find anything. so i changed the pushrods and rocker arms they looked a little worn out. when i tried to start it. it would crank over but nothing. geting fire and fuel.tomorrow im going to give it a tune up. plugs and wires. i installed new plugs but looke fouled. the engine smokes a little bit could that be fouling the plugs. is there any thing to fix this for sure if that is the problem(msd maybe)
Thanks
denny <img src="graemlins/boxing.gif" border="0" alt="[boxing]" />
Reply With Quote