Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SBC Questions
Thread: SBC Questions
View Single Post
  #1 (permalink)  
Old 12-27-2012, 07:48 PM
fastnloud's Avatar
fastnloud fastnloud is offline
Registered User
 
Last photo:
Join Date: Nov 2012
Posts: 131
Wiki Edits: 0

Thanks: 86
Thanked 1 Time in 1 Post
SBC Questions

I have an 82 GMC Sierra with a built 350 and 350 turbo trans. Street driven.

Here are the specs on my motor:

350 4 Bolt Main .040 Over
Scat forged I beam rods
Keith Black flat top pistons 4v reliefs
Moly rings
World Sportsman II heads 2.02 valves and 64cc chambers
Edelbrock performer rpm intake
Edelbrock 650 carb
1 7/8 longtube headers
Lunati Bracket Master II Cam 300 duration
Crane Valve springs
Crane roller rockers
Comp Cams double roller timing set


Trans:
350 turbo
b&m rebuild kit
stage 2 shift kit
Hughes Performance 3000 stall

I haven't dynoed it, but the truck runs very well!

My questions are... what would I need to add/change out to make my motor a 383 stroker? How much more horsepower would I be looking at?

Also, would a tunnel ram intake make very much more horsepower or torque?

Thanks guys.
Reply With Quote