Hot Rod Forum banner

SBC Questions

5K views 37 replies 8 participants last post by  Custom10 
#1 ·
I have an 82 GMC Sierra with a built 350 and 350 turbo trans. Street driven.

Here are the specs on my motor:

350 4 Bolt Main .040 Over
Scat forged I beam rods
Keith Black flat top pistons 4v reliefs
Moly rings
World Sportsman II heads 2.02 valves and 64cc chambers
Edelbrock performer rpm intake
Edelbrock 650 carb
1 7/8 longtube headers
Lunati Bracket Master II Cam 300 duration
Crane Valve springs
Crane roller rockers
Comp Cams double roller timing set


Trans:
350 turbo
b&m rebuild kit
stage 2 shift kit
Hughes Performance 3000 stall

I haven't dynoed it, but the truck runs very well!

My questions are... what would I need to add/change out to make my motor a 383 stroker? How much more horsepower would I be looking at?

Also, would a tunnel ram intake make very much more horsepower or torque?

Thanks guys.
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top