Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SBC -> S10 build
View Single Post
  #6 (permalink)  
Old 09-25-2012, 06:00 PM
Redline09 Redline09 is offline
Registered User
Join Date: Sep 2012
Posts: 3
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Okay sorry wasn't sure on the dart heads if they were 180 or 185cc. They are the older ore platinums 180cc. Cam that I'm going to run until I can get a roller is the lunati 00012. Setup will be as follows
73 sbc .030" decked .015"
Forged bottom end with kb flat tops
Lunati 00012
Dart iron eagle heads 180cc 64cc
1.6 roller rockers
Valve springs still choosing
Victor jr w/ intake ports matched to the darts
Carb still choosing

Th400 Trans with shift kit
Stall still choosing
Reply With Quote