Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Sbc street motor ETs
View Single Post
  #6 (permalink)  
Old 12-06-2011, 04:22 PM
NovaJoe1973's Avatar
NovaJoe1973 NovaJoe1973 is offline
Registered User
 
Last photo:
Join Date: Nov 2011
Location: WA state
Posts: 20
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by aisr
Hi Joe,
My street car has a 9.5:1 350, 4 bbl Carter 625 carb, and a manual 4 spd. 3.73 gears and 275 radials. 91/92 octane pump gas only (no race gas or injection). Stock rods/bolts, cast pistons, has not had the heads off in the last 10 years.

I took it to the street drags a few times this summer (set up on front straightaway of an oval track). It's a little short of a full 1/8th, but it's been 5.71 with a 1.30 60' (Powershot plate w/ a .068 Holley jet). Never been on a trailer in the last 15 years.

Where are you in WA?
I live in Port Orchard. I do most of my racing at Bremerton raceway and sometimes at Pacific.
Reply With Quote