|
|
|
02-12-2007, 02:02 PM
|
|||||
|
|||||
|
SBC Stroker Oil Pan Problem??
Hello
I currently have an 84 Chevy block that i just installed a forged eagle rotating asembly. The stroke is 3.750 with 6.0 Eagle rods. 80-85 blocks still have a 2 piece seal but have a right handed dipstick instead of a left. I cannot find a stroker oil pan or a pan that will clear more than 3.500 stroke for this year block. Can a do thing the old fashion way and install a pan, turn the engine over and hammer the pan out where it rubs?? Or will there still not be enough clearence?? Help plz?? 
|
|
02-12-2007, 02:36 PM
|
||||||
|
||||||
|
Have you verified you will even have a problem with a stock pan? I don't know why the crank will fit within the confines of the block but the pan won't even cover it. I've never see a problem with one.
|
|
02-12-2007, 03:07 PM
|
||||||
|
||||||
|
You shouldn't have a problem. If you're just reading pan specs, ignore them. Most all pans will clear it. My 329 stroker's origional pan clears just fine.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Chevy 6.5 Diesel has no oil pressure again!!! | dorksrock | Engine | 12 | 09-02-2012 08:51 PM |
| SBC Oil Pan Front Seal (SOS) | Canadian Charlie | Engine | 6 | 03-08-2006 02:37 PM |
| A little humor | Kevin45 | Hotrodders' Lounge | 8 | 10-21-2004 12:47 PM |
| Milodon oil pan...7 qt w/ filter or + filter? | Finmike | Engine | 6 | 07-05-2004 10:44 PM |
| Oil Pan/ Windage Screen Problems | DTL504 | Engine | 4 | 05-13-2004 04:37 PM |
