Hot Rod Forum banner

SBC valve seals

2K views 1 reply 2 participants last post by  SSedan64 
#1 ·
I have a .060 327 that I am reassembling for my kids 81 shortbox. I have dh iron heads with bronze guides that I am adding stem seals in addition to the o-rings. My question is can/do I get rid of the stock steel umbrella to reduce valvetrain weight?

Other related parts.

3/8 screw-ins, guide plates
Crane HT-288-2-NC cam
Crane purple stripes
Comp ProMagnum 1.6 roller rockers
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top