Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - sbc wont move freely after rebuild rebuild.
View Single Post
  #1 (permalink)  
Old 12-10-2012, 06:35 AM
nskeeter99 nskeeter99 is offline
Registered User
 
Last photo:
Join Date: Sep 2008
Location: louisana
Posts: 225
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
sbc wont move freely after rebuild rebuild.

A buddy of mine brought me a crate engine from jaspers that was very difficult to turn over. He told me he traded for it. The guy he got it from took it apart a few years ago but did not mark anything. Then put it back together.I loosened all the rod bolts, and got it to turn. So I started tightening on rod at a time and checking to see if i could turn it. if it turn i went to the next one if not i tried swapping some around. I have the front 4 good. I can get 1 of the last 4 by itself but can get all 4 at once. Do any of ya ll have a secret to help fix this are do i have to just keep moving caps till i get it?
Reply With Quote