[Ortie666]

No doubt, i see more pollished aluminum than anything, mabye some SS (stainless steel)

[pepi]

here's mine

[donsrods]

Well, since my engine still needs to go to the machine shop and get prettied up, I'll post a picture of my Sons 30 over 455 Olds in the '29 Ford he's currently building. It is topped with a '66 Olds 442 tripower setup. Since the pictures he has had the carbs professionally restored. Should have the car running in the next couple of months I hope.


Don

PS: All that stuff in the rear is because the car is airbagged front and rear.

[CrashFarmer2]

1969 Lincoln 460

[godsMistake]

Just a rebuilt-mostly stock '74 350 from police package Caprice, now in my '79 MC. BTW, the block is metallic purple, hard to tell by the pics. This is what it looked like this 6months ago:

[tiresmoke55]

Just pic of my 406 sbc with a tunnel ram in my 55 chevy, but sorry no good pic of it yet... bye the way there some mighty fine motor's in your guy's cars, really sharp work

[Mr. Wormy]

66 327 in a 73 nova and 350 ram rod 72 442

[vabeach56wagon]

383, Callies 'Dragonslayer' internally balanced crank,Dart Pro 1 heads, Comp special grind (228/236 at .050-.554/.570 lift on 112LSA)hydraulic roller,full roller 1.6Comp rockers,Perf RPM AG with 750cfm Street HP Holley,9.5-1,in early model 2pc rear main seal block...

In '56 9 passenger 210 Chev wagon, TH350,Moser 9"-3.25 with True-trac

Paul
www.picturetrail.com/vabeach56wagon

[123pugsy]

283 CI in my 76 Chevy C-10

[IMG][/IMG]

[oldster]

The before and after

355 four bolt main

[hybridste]

Not exactly your idea of a hotrod, but 385 whp @ 18 psi on pump gas isn't bad for me, Imagin race gas now... Runs a 12.594 @ 126.45 mph in the 1/4 on street tires and pump gas. By the way everyone remember my tribute car... here is the engine as it sits now... 3400 heads and lower intake, 3500 upper intake, 65 mm throtle body, and GT3076R garret turbo .

[cruzn65impala]

Originally Posted by hybridste

Not exactly your idea of a hotrod, but 385 whp @ 18 psi on pump gas isn't bad for me, Imagin race gas now... Runs a 12.594 @ 126.45 mph in the 1/4 on street tires and pump gas. By the way everyone remember my tribute car... here is the engine as it sits now... 3400 heads and lower intake, 3500 upper intake, 65 mm throtle body, and GT3076R garret turbo .

Well, not exactly "hotrod" in the traditional sense, but nonetheless, very impressive numbers.

[tiresmoke55]

Just found this old pic of the last 355sbc i built and stuck in a 79 Malibu i had about 1 year ago,,, wish i still had the motor i would stick it in my 55 Chevy

350 .30 over
550 lift solid comp cam
1.6 roller rockers
2.05 alum vette heads port match and polished
850cfm carb
victor intake
Keith black flat top piston's

Revved really good to 6500+
guessing 450 to 500 hp?
never went to the track but i raced my buddy's 12 sec nova and got him by a fender

[PharaohChris]

8RT Flathead
Vintage "Multipower" Dual intake w/94s
Headers
Pretty much stock elsewhere (for now )

[mobythevan]

Should be firing this on the test stand next weekend. 454 with B&M 250 charger, Fuel injected with distributorless ignition. The last piece is determining the size of spacer I need for the lower supercharger pulley. I would like to use two spacers and put my decoder wheel between them for the ignition system. Should know exactly what I need after this weekend.