Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (
-   Hotrodders' Lounge (
-   -   show pics of your engines boys! (

cabowabo 06-27-2006 05:16 PM

show pics of your engines boys!
4 Attachment(s)
im working on a 1970 355 supercharged 2 600's 4spd 4.11 posi gmc 1/2 ton stepside truck i got over 15k invested so far here's some pictures

383MontecarloSS 06-27-2006 05:31 PM

The Monte SS will be moving once again :thumbup:

LSx 408:

-Diamond pistons 10.5 compression [maybe lower]
-Arp head studs
-Ls2 timing chain
-Comp chrome moly pushrods
-Manley rods
-Eagle crank
-Callies billet mains
-Prs ls6 ported heads
-Patriot dual springs
-cam: 242 250 114
-Harlan sharp rockers
-FAST intake

....and much much more.

cabowabo 06-27-2006 05:46 PM

very nice ,koo koo

crazy larry 06-27-2006 07:04 PM

warm 390. :cool:

Centerline 06-27-2006 07:23 PM

Warmed over 343 ci. Hemi

302 Z28 06-27-2006 08:17 PM

Fastburn 350, 385hp in my 34.

Pony 06-27-2006 08:27 PM

3 Attachment(s)
1974 Corvette Stingray street driven.

53fatfndr 06-27-2006 08:35 PM

2 Attachment(s)
My warmed over 400 in my '53. ;)

Blazin72 06-27-2006 09:55 PM

1 Attachment(s)
This is my ugly, beat to death, recently supercharged 350 ... It's lived a hard life under the hood of my beat up 72 Blazer and seen more than a few 6400 rpm pulls :D . It doesnt smoke and still has good oil pressure but I think it's time to pull it and clean it up...

MI2600 06-27-2006 09:57 PM

383 disguised as a 327 in my '67.

Sixguns 06-27-2006 10:14 PM

1 Attachment(s)
Big Caddy in my 36 laSalle coupe

topfuel 06-27-2006 10:33 PM

1 Attachment(s)
Here's the engine in the Biscayne. It's a 433 cu. in. BBC that dynoed at 638 @ 7400 without the NOS Big Shot sytem. It's not much on the bottom end, but it really gets with the program from about 3800 on up. Not too bad for a pump gas motor. :D

2fast69 06-27-2006 11:37 PM

358 Supercharged SBC
Here's my humble post...

Weiand 142 CI supercharged, trick-flow 23 degree aluminum heads, MSD Ignition, Hooker Super Competition Headers, Crane Gold Roller Rocker Arms,
Summit 1107 Flat Tappet Cam, Carb Shop Holley 750 CFM, stock block 0.060 overbore, 10:1 compression ratio

bigbadbowtie 06-28-2006 06:50 AM

Flat top 355 SBC, TFS heads, TNW nitrous plate system, solid roller
78 z28 3440lb without me. 10.7x@127 on 125 jets.

jcclark 06-28-2006 07:17 AM

Man, you guys are way out of my league.
I was proud of my little redo for a neighbor 2 yrs ago.

I hope you won't laugh me outta here,
Still, I like rebuilding them.
(I'm really a painter ya know!
I snuck over here from the body forum)
I really like your knowledge here :pimp:

All times are GMT -6. The time now is 09:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.