Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - show pics of your engines boys!
View Single Post
  #275 (permalink)  
Old 06-05-2008, 11:18 AM
solidaxel's Avatar
solidaxel solidaxel is offline

Last journal entry: Project garage complete!
Last photo:
Join Date: Jul 2003
Location: So. Arizona
Posts: 558
Wiki Edits: 0

Thanks: 2
Thanked 1 Time in 1 Post
Originally Posted by Double_v23
Here is one that is a little different from what you might normally see on here.

It is a Wissota Midwest Mod engine (B mod) which is very restricted, however these motors will get 375 HP and 400 Ft/lbs out of a 2 barrel holley, 9.5:1 compression, Hydraulic Cam, and large chamber heads with 1.94 1.50 valves. No Port work, no polishing, no grinding, no coatings of any kind. Just time tested and proven machine work and assembly. You can't even use aftermarket cranks and rods. All GM. This one is a 358 CI SBC. And you can buy it today only for 5,000 bucks...just kidding this one is already sold.

At what RPM does it develope 400#ft?
Reply With Quote