88' chevy s-10 engine and trans swap

I have an 88" chevy s-10 truck with a v-6 and a 5speed manual trans. I was wondering if the 77' v-8pontiac 400ci block and borg-warner t-10 4speed manual trans would fit in there.


Register now (free) or login to remove ads

any motor will fit in there, it just depends on what you want to do to make it sit in there. a big help for giving advice would be if it is 2 wheel or 4 wheel. answer that and i will try to help

Great answer by crussell85.

I've always said that with a MIG, cutting torch, Sawzall and a good hand grinder, I can make anything fit anything.

James, spend a couple coin and get this book used....less than a sawbuck with shipping....
http://www.amazon.com/gp/offer-list...35124526&sr=1-2

i have a 93 blazer with a 2.8 6cyl auto,trans runs really good, but has other problems. i keep finding diff s10's with blown motors for cheap and free with title
the one i want is an 98 s10 pickup 4cyl auto trans.
i have found i may need to use the 2.8 trans and computer.
would that work? would it be worth the trouble?
the 93 blazer is 4 wheel and the 98pickup is 2 wheel.
any info or input would be helpful.
Nick L

There is a certain manual strickly for s10 v8 engine swaps and its the best one out there bar none http://www.jagsthatrun.com/Pages/Ch...t_S-10_V-8.html that is a place to start at. I have two a s10's with 350's in them one an 86 for my weekend warrior and the other is a 96 wich is my daily driver.
Eric