|
|
|
|
#1
07-05-2011, 02:14 PM
|
||||
|
||||
|
1951 Chev 3100 truck
Does the 1951 Chev 3100 truck body have side vent louvers on both sides of the cab or only on the passenger side
Register now (free) or login to remove ads 
|
|
#2
07-05-2011, 11:00 PM
|
|||||
|
|||||
|
only on the passanger side
|
|
#3
07-06-2011, 08:07 AM
|
||||||
|
||||||
|
It was for the heater intake. The stock heater bolted to the side of the cowl under the glove box.
Brian
|
|
#4
07-06-2011, 01:38 PM
|
||||
|
||||
|
early chevrolet 6cyl bellhousing and exhaust
looking for a 235 chevrolet 6 cyl bellhousing to bolt a late model 4 speed transmission to. What other problems will I run into making this swap. Does any one make a complete duel exhaust kit...headers to exhaust tip for a 1951 Chevrolet truck 3100 with a 235 6 cyl motor.
|
|
#5
07-06-2011, 03:22 PM
|
||||||
|
||||||
|
The popular swap is the T5 five speed used by GM thru the eighties and nineties. On the exhaust system there are tons of headers and such out there. I have Fenton Cast Iron headers for mine.
You need to check out the "Stovebolters" forum at http://www.stovebolt.com/ It is THE best forum for these trucks. Brian
|
|
#6
07-06-2011, 09:58 PM
|
||||||
|
||||||
|
Thanks for the link Brian ...I've got a 54 I've been trying to figure out what to do with...
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "1951 Chev 3100 truck" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 57 chev 3100 front shock mounting | vetteman | Suspension - Brakes - Steering | 1 | 11-29-2010 06:17 PM |
| 57 chev 3100 camber issue | vetteman | Suspension - Brakes - Steering | 3 | 11-09-2010 07:29 PM |
| IFS Mustang II for my 53 Chev 3100 W/stock ride hight? | zachscc | Suspension - Brakes - Steering | 1 | 02-07-2009 08:36 PM |
| chev truck 3100 series vs 1300 series? | In_Style | Hotrodding Basics | 14 | 07-17-2005 06:51 AM |
| drive shaft 1954 Chev 3100 | evergreenw | Transmission - Rearend | 3 | 08-01-2003 03:51 AM |
