|
|
|
|
#1
11-02-2011, 08:33 PM
|
||||
|
||||
|
73 chevy pu
|
|
#2
11-03-2011, 04:00 AM
|
||||||
|
||||||
|
1st I'd make sure you have the correct starter for the flywheel that's on the truck, if it's the right one....... what's it doing? Hitting the flywheel, not releasing, dragging..... basicly put a shim between the starter and the engine block, torque to specs and see if you still have the orig issue... repeat as ness, but if the tooth count on the flywheel doesn't match your starter, no amount of shims will fix it.
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "73 chevy pu" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 153 tooth Chevy flywheel in an original '55 Chevy 3 speed stick. | Classic Chevy Dave | Engine | 2 | 09-17-2010 03:44 PM |
| Putting a 72' chevy 350 into 1995 chevy silverado that has a 4l80e trans | Willbee26 | Transmission - Rearend | 3 | 03-28-2010 10:40 PM |
| chevy camaro vs chevy pickup bolt pattern | old fords | Transmission - Rearend | 2 | 09-19-2008 06:07 PM |
| Can you use a 1933 or 1935 Chevy transmission in a 1934 Chevy? | mistermuscles | Transmission - Rearend | 0 | 07-18-2004 05:40 PM |
| 1986 305 chevy vs. 1987 305 chevy new style small block | mtinsley | Engine | 2 | 08-22-2003 11:55 AM |
