![]() |
|
|
|
#1
|
||||
|
||||
|
67 camaro sail panels installation
Well I got my headliner on and it looks good, but Im stumped on the inside quarter panel area, the sail panels. I have the material glued nicely to the board but I cant seem to find a way to hold them up there so they look stock. I tried it with the clips that attach to the panel and your just suppose to push on, but the edges just don't sit flush. Im sure im missing something. need a little help here. any suggestions will be greatly appreciated. If it needed to be put on with a wrench I could of already figured it out.
Register now (free) or login to remove ads |
|
#2
|
||||||
|
||||||
|
The front and rear edges are held in by the windlace if I remember right. I use velcro on the backside of it where the headliner gets pulled taught and stapled or pushpinned.
|
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "67 camaro sail panels installation" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Custom Sail Panels? | S2X01 | Interior | 4 | 05-04-2011 02:16 PM |
| 2nd gen camaro panels | sizedoesmatter | Body - Exterior | 3 | 05-01-2010 01:06 PM |
| Attaching sail panels after headliner is installed | heyjude076 | Interior | 2 | 02-09-2008 09:43 PM |
| CD installation in a 68 Camaro | duanecourt | Interior | 6 | 05-14-2003 04:30 AM |
| camaro panels??? | neil madsen | Body - Exterior | 6 | 12-29-2002 12:34 PM |