|
|
|
|
#1
11-13-2011, 10:56 PM
|
||||
|
||||
|
91 4x4 5 speed s10, clutch install problems
i have a 91 4x4 5 speed s10 that i am putting a clutch in i got the trans out and new clutch in but i try to put the trans back in and i can only get the trans high enough to get the shaft to the forks on the pressure plate and then i cant get it ant higher it seems like i am hitting the pinch weld on the firewall and floor any ideas on how to get this thing in the truck
Register now (free) or login to remove ads 
|
|
#2
11-14-2011, 12:07 AM
|
||||||
|
||||||
|
Quote:
You might try jacking up the front of the motor to tilt it back while you bolt up the tranny.
|
|
#3
11-14-2011, 06:07 AM
|
||||||
|
||||||
|
unbolt the exhaust from the manifolds...
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "91 4x4 5 speed s10, clutch install problems" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| S10 5 speed clutch disc | Mrwood | Transmission - Rearend | 9 | 11-09-2010 12:09 AM |
| I'm sharing a t-400 trick to install those pesky clutch piston seals | Big Buick | Transmission - Rearend | 4 | 07-19-2010 07:48 AM |
| clutch/pressure plate install question | levens | Transmission - Rearend | 4 | 12-30-2004 09:37 PM |
| Clutch problems 95 camaro 5 speed | namdlo | Transmission - Rearend | 1 | 06-22-2004 09:39 AM |
| do I need to install a stall speed? | the ernster | Transmission - Rearend | 2 | 04-13-2003 08:59 AM |
