|
|
|
|
#1
12-29-2011, 09:54 AM
|
||||
|
||||
|
2000 Suburban 4L60E problem
Just rebuilt the 4L60E because I had lost 3rd and 4th gears.
Air checked as I put it all together and everything checked out. Once I installed the trans., and test drove all I have is reverse and 1st gear. I cannot get it to shift even mannually. I pulled the wire harness off but it made no differance I still only get reverse and 1st. Can anyone tell me where I might have missed something? Register now (free) or login to remove ads 
|
|
#2
12-29-2011, 07:34 PM
|
||||||
|
||||||
|
are u sure its first and not taking off and staying in 2nd if if the sprag is in backwards or locked up or the clutches are to tight
|
|
#3
12-31-2011, 10:30 AM
|
||||||
|
||||||
|
Quote:
You missed something. When the wire harness is unplugged the trans will default to 3rd gear in "D" if the trans is built correctly. Reverse is a function of the manual shift valve, not solenoid activated
__________________
At the Bonneville Salt Flats, first gear is known as 130 mph.
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "2000 Suburban 4L60E problem" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1994 Chevy Suburban K1500 4L60e Transmission Problem | rmar2010 | Transmission - Rearend | 2 | 11-29-2010 03:08 PM |
| 2000 4L60E to an earlier 4L60E, What do I need to change out | aquaterrarv | Transmission - Rearend | 2 | 04-08-2010 06:22 PM |
| 2000 Tahoe W/4L60E trans problem | crackrbaby1 | Transmission - Rearend | 0 | 04-21-2009 08:12 PM |
| 4l60e problem 93 suburban | hecfrombx | Transmission - Rearend | 21 | 04-04-2009 07:40 AM |
| 96 Suburban W/4L60E | BICHN69 | Transmission - Rearend | 2 | 05-24-2005 10:43 PM |
