|
|
|
|
#1
01-21-2012, 07:42 PM
|
||||
|
||||
|
350 tpi build
I am building a 70s era 355 chevy block with an early tpi that has been changed to speed density for my 32 ford coupe. It has a turbo 350 trans., and is running 325 gears in the rearend. The car also has air cond. The wiring harness and the comp. are used tpi tech units (basic street rod type harness and under hood sealed 4 plug type comp.or ecm. I want to put a roller cam in this that has a nice bump to it at idle but still works with the efi. The heads on this are 487s with 76cc chambers. A head change is not out of the question either. Any help on this is appreciated. 32jerryh
Register now (free) or login to remove ads 
|
|
#2
01-21-2012, 07:51 PM
|
|||||
|
|||||
|
Call Myron at TPI Specialties or Arizona Speed & Marine. They are the TPI experts.
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "350 tpi build" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 355 build??'s about compression and build | impalaman355 | Engine | 6 | 06-06-2011 10:20 AM |
| 406 Build | crowerjunky | Engine | 6 | 01-31-2011 06:42 PM |
| USA BUILD vs CANADIAN BUILD? | troy norrad | Hotrodding Basics | 19 | 02-18-2008 09:57 PM |
| 200-4r experts - build questions - Which core is best to build on? | Warrant | Transmission - Rearend | 7 | 10-09-2007 07:36 PM |
| Help me build a SBC 350?!?!? | cmyoung29 | Engine | 7 | 01-16-2007 10:55 PM |
